
DVC-30 Stage 2
Sku: [5106]
Retail: $375.00
This product page is for"DVC-30 Stage 2" which are manifactured by DevilsOwn Injection and are in the catagory Universal.
This kit features a DevilsOwn 2nd Generation Water-Methanol Injection Controller. Because the kit has a built in 30 psi boost port, simply run a boost line signal to the controller, wire it up to power, then to ground and finally the pump. You will then be able to increase your boost timing and most importantly, you will have more power. Another new feature of the2nd Generation Digital Variable Controller is that you can hook up a float level sensor, or any other ground trigger, to one of the controller inputs and it will light up the multi-function LED thereby notifying you of your fluid levels.
The DevilsOwn Progressive Water-Methanol Injection Kits main purpose is to suppress detonation caused by high temperature and pressure that has developed in the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point, by either a turbo or a supercharger.
Compressed air is heated air that causes a reduction of power and detonation. DevilsOwn's kits helps lessen any reduction while also increasing fuel mileage. These kits are for applications where you desire the full control of your water injection needs.
Cool the compressed air with the DevilsOwn water-methanol injection kit. Because water has a high latent heat content, it is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in modern lean burning engines. Methanol, with its 116 octane high flash points and specific gravity, helps further reduce the chances of pre-detonation.
Benefits Of Water-Methanol Injection:
Increase horsepower safely by 10-15%
Lower air temperatures by 50-200+ degrees
Increases octane when you need it under boost.
Reduces cylinder temperatures up to 300+ degrees
No wear issues only clean combustion chambers
Allows you to safely run more boost and timing
System Contents Include:
Completely adjustable digital progressive controller
250 psi pump with EPDM seals
Heavy duty nickel plated check valve
15 ft of black high pressure nylon tubing
2 Micro droplet nozzles DO3,DO7
All necessary hardware
Detailed Instructions
Important Notes:
Requires only basic hand tools
Proper tuning is required to achieve maximum results
Installation time approx. 2-3 hours
FAQ's:
Methanol water injection faq's
Instruction:
Stage 2 Water methanol injection instructions
Warranty:
DevilsOwn Injection stands behind there parts and warrants this system free of defects for up to 1 year after purchase. Refer to our warranty page for complete details.
DVC-30 Progressive Controller
Dont let there small size fool you. These Digital progressive controllers feature the latest technology in Water-Methanol system control. Designed to increase injection pressure over a user adjustable range and quickly shut off when boost pressure drops to prevent misfire.
250 psi Methanol Water Pump
Adjustable pressure 150 to 250psi
Recirculating pulse free design
Can run dry without damage
Engineered for Methanol
Long lifetime, 10+ Millions cycles
Micro Droplet Nozzles
Unsurpassed atomization due to superior nozzle design. Consistently deliver superior, long-lasting, trouble-free performance. Intergrated O-ring for a leak free seal
AVAILBLE AT TUNING
GRüPPE 
Message for special pricing!
read more »